The
James Super Ripper is designed for heavy duty ripping using
100hp plus tractors and has four working options. Tools not
in use are simply lifted and locked out of the way.
Option
One - Cultivation Ripping
Use as a 5 Leg Ripper with 500mm spacings providing a 2.5m
working width. Wider units can be manufactured to order.
Option
Two - Subsoiling
Use 3 front legs at 1 metre spacings for subsoiling
purposes.
Option
Three - Tree Planting
Use a single rear leg providing a single rip of approximately
500mm shatter width. This leg is fitted with a delta type
wing to increase shatter pattern. Alternatively, use 3 rear
legs at 500mm spacings providing a ripped tree line 1.5m
wide with the centre leg working at 700mm if required.
This system encourages deep massive root structure
development and the establishment of more robust trees.
Option
Four - Pipe Laying
Fit the sliding back pipe laying chute to the rear centre
leg and lay up to 50mm alkathene pipe. The rear of the
chute is removable, permitting pipe to be removed or
inserted at any stage without cutting, consequently saving
the cost of a joiner.
Features:
-
Pipe
Laying chute stored on ripper when not in use
-
250
x 150 x 9 RHS toolbar
-
800mm
stagger between front and rear legs to provide trash
clearance
-
25mm
legs
-
Replaceable
pinned-on tips
