The James Heavy Duty Mole plough is designed to transfer ground water to
field tiles or open drains in soils where there is good clay subsoil. The
mole plough forms a 60mm channel in the clay at a depth of approximately
46cm providing drainage.
Heavy Duty Mole Plough
Features
The long heavy
duty beams provide excellent planing action on undulating
ground surfaces.
A 450mm skieth can
be fitted to cut surface trash to avoid blade build-up.
A wear resistant shin plate is fitted to the blade
cutting edge as standard.
The high tensile
blade is shearbolt protected.
A swivelled
headstock permits easy following of contours and reduces
stress on tractor hydraulic arms.
Side springs fitted to the headstock centralise the
moleplough when positioning the unit for the next run. They
also cushion side-swing when being transported on un-even
ground.
A hydraulic ram can
also be fitted if required in a dairying situation where
open drains are protected by a single wire electric fence.
By retracting the ram the plough can be reversed under the
wire to access the drain.
The hydraulic ram can be used as a top-link ram if
desired.
Extending the
hydraulic ram returns the blade to working position when
the plough is positioned over drain.
